Five Functional Electric Bed
- Bed base, Frame and leg are made of cold-rolled steel plate and tube, coated by electro static spray aftertwice phospatization.
- The quality attains national standard, luxurious plastic bottom cover Head and foot boards.
- Side rails are made of imported P.P. Materials.
- It is equipped with vertical traveling motor.
- which is quite is noise less and able to support over 250 kgs.
- Side-rail control panels make patient operate much easier (with controllerfor nurse and CPR).
- Resist and enable to move the bed flexible, lightly and conveniently.
- CPR for zero positioning of bed
Five Functional Manual Bed
- Frame made of Strong Rectangular CRCA Pipe.
- Uniformly Perforated Four Sectional CRCA Sheet Top v Back-rest, Knee-Rest Obtained by Crank Mechanism. v S.S. Molded Head & Foot Panels.
- S.S. Collapsible, Side Safety Railing.
- Overall Size 220L x 100W x 60-80H cms.
- Pre-treated and Epoxy Powder Coated.
- Bed Mounted on 5 inch Special Castors, two with Brakes.
Three Functional Electric Bed
- Four pieces individual side rails ABS moulde of ABS head and foot boards
- Frame work made of M.S. Tubes
- Bed mounted on 5 Inch casters, two with brakes top made of perforated design
- S.S. Telescopic I.V. rod with four locations
- Finish pre-treated and epoxy power coated
- Advanoed linear actuator system (Positions obtained by hand remote)
- Back-rest, Knee-rest elevation
- Hi-Low
Electric Fowler Bed
- Four pieces Individual side rails ABS moulded
- ABS head and foot boards
- Frame work made of M.S. Tubes
- Bed mounted on 5 Inch casters, Two with brakes Topmade of oval perforated design
- finish protected and epoxy powder coated
- Advance lenear actuator system (Positions obtained by hand remote)
- Back rest elevation
- Knee rest elevation
Fowler Bed
- Frame made of Strong Rectangular CRCA Pipe.
- Back-rest by Crank Mechanism.
- S.S Molded Head & Foot Panels.
- Bed mounted on 5 Inch casters, Two with brakes
- Overall Size 220L x 100W x 60-80H cms.
- Pre-treated and Epoxy Powder Coated. v S.S Foldable Handle
Semi Fowler Bed
- ABS head and foot boards
- Aluminum side rail
- Frame work made of M.S. Tubes
- Bed mounted on 5 inch casters, Two with brakes
- Top made of oval perforated design
- Finish pre-treated and epoxy powder coated
- Advance line actuator system (Position obtain by hand remote)
- Back-rest elevation
Plain Bed
- Frame madeof strong SS Pipe
- SS Molded Head & Foot Panels
- Overall Size : 220 L x 100 W x 60 - 80 H cms.
- Also available in MS
Labour Delivery Bed Electric
- Over all size : 2050Lx 980W x 580 - 950 H mm.
- Tubular frame work mounted on 125mm dia control locking castors.
- Top made in three section mattress.
- Trendlenburg / Rev. Trendlenburg positions adjustment, Height adjustment
- Back section adjustmentthough high quality actuator.
- leg and section can slide underthe main section.
- Provide with a pair of uphotstery lithotomy positions.
- S.S. telescopic I.V. rod
- 1 Detachable S.S. tray
Baby Cradel
- M.S. Tublar pipe
- Stand Fitted with PVC Stumps.
- Wire mesh hanging cradle
- 36"X15" X 39"
- Pre-Treated and Epoxy Powder Coated.
Baby Bassient
- Preprex Transparent Crip with mattress.
- Pre-Treated and Epoxy Powder Coated.
Baby Trolley
- Height adjustable by pneum atic gas spring Tendlenburg
Reverse Tendblenburg positions Epoxy poefrtvosyrf
- Four 100mm casters two with brakes
Attendant Bed
- Frame made of CRCA Pipe/CRCA Sheet.
- S.S. head & foot bows.
- Overall Size: 192LX62W X 46H cms.
- Pre-treated and epoxy powder coated.
Attendant Bed cum chair
- MS Tubular frame work mounted on PVC stumps
- Epoxy powder Coated Finish.
- Overall Size : 188L X 50L X 40H cms.
Wheel Chair Folding
- Steel Material Chorme Plated
- Seat & Back Upholstery Made of Colored Leatherate.
- 8"X1" Front wheel & Aluminum foot rest.
- Seat width 46cms & overall width 65cms.
Emergancy Trolley Hydraulic
- Tubular Trolley with foot operated Hydraulic pump for height Adjustment.
- Pneumatic Mechanism For Trendelenberg/Reverse Trendelenberg position
- Two Sectional X-ray Transluent Top with Mattress, Tray for holding X-ray
Cassettes.
- Head Raise by Ratchet System.
- Trolley Mobile on Four 150mm. Two castors with Brakes.
- provided with powder coated swing away Type Side Rails, One S.S.I.V. Rod,
Utility Tray & Cylinder Cage.
v Size : 210L x 67W x 65/85H cms. (Adjustable
Stretcher Trolley
- Dimensions : 213L x 56W x 81H cms.
- Frame work of CRCA tubes mounted on 15 cm castors
- Removable stretchertop with chrome plated handle
- Pre-treated and epoxy powder coated
Adjustable Over Bed Table
- Powder coating
- Wooden Press Membrane Table Top
- 40mmx 80mm outer Support Stainless tube
- 400mm square stainless tubing legs
- 80 (L)X 38 (w) cms table top
- Height Adj: 76cm -106cm
- Plastic caster x 4 pcs
- Also available in S.S.
Over Bed Table
- Over bed table is made of high quality material.
- Laminated wooden top.
- Standard height adjustable using knob.
- OVer bed table is with twin stand.
- Optional height adjustable using gear mechanism and over the OT
Table.
- Laminated wooden top dimension : 760mm LX 400mmW.
- Also available in S.S.
Adjustable Over Bed Tilt Table
- Also available in S.S.
- Powder coating
- Wooden printing melamine laminate table tilt top
- 40mm x 80mm outersupport stainless tube
- 400mm square stainless tubing legs
- 80 (L) x38 (VV) cms table top
- Height Adj.: 76em - 106cm
- Plastic casterx4 pcs
- Also available in S.S.
Bed Side Locker
- Made of high quality sheet metal o S.S. top
- Hospital bedside lockers optionally available without drawer
underthe top
- Hospital bedside lockers
- Provided with one storage cabinet and single drawer underthe
top and space for keeping utilities.
- Standard dimension: L 160 mm x W 160 mm x H 320 mm
- Also available in Fully S.S
Bed Side Rack
- Wholly made of stainless steel.
- Top Size : 41X 41 Cms
- Height : 81 cms
- Also available in M.S.
Kick Bucket
- Wholly made of stainless steel.
- Three Smooth 2 inch swivel casters.
Revolving Stool
- S.S. Tubular four legs itted with PVC stumps
- Footring support
- 18 to 27 adjustable heights
- S.S. Top through screw, pre treated and epoxy powder coated
- (Also available M.S. Legs & top)
Visiting Stool
- Dimensions : 12 (L) X 12 (W) X 20 (H) cms
- CRC sheet duly double press bent
- Pre-treated and epoxy powder coated
- M.S. Tubular frame itted with pvc stump
- Also available in S.S. Legs & Top
Foot Rest
- Frame work of CRCA tubes
- Pre-treated and epoxy powder coated Finish
- Size 46LX60 X 30 H Cms
- Also available in S.S
Cylinder Trolley
- Mobile on two 100mm Castors
- PRe-treated and epoxy powder coated Finish
- Also available in S.S.
Linen Trolley
- Overall approx size : 900mm H X 500 mm (Dia)
- Frame work made of stainless steel tubes mounted on
100mm Castors
- Superior quality canvas bad.
- Also available in M.S
Crash Cart
- Six removable bins & two polystyrene storage unit with three
drawers each.
- 12.5cm swivel media castors, two are breaking.
- Corner buffers.
- Oxygen Cylinder Holder provision.
- I.V. Rod provision.
- Overall approx size : 940mmL x 490mmWx 1535 mmH
- Also available in S.S
Mayo's Trolley
- Mayo's Instruments hospital Trolley available in SS material.
- Mayo's Instruments hospital Trolley with height adjustable knob.
- Optional height adjustment using gear mechanism available
- Standard: single stand vertical column.
- Optional Mayo Instruments hospital Trolley with double stand vertical
column overthe OT available
- Standard tray dimension: 600mm Lx460mm W.
- Quality castors
Three/Four Fold Screen
- Overall approx size : 1680(L)mm x 2450(W)mm
- M.S tubular construction made of 19 mm x 18G in four section.
- Legs made of 25 mm x 18G Fitted with 50 mm Castors
- Each span 610 mm wide
- Supplied with hooks and spring with curtain cloth
- Finish: pre treated and epoxy powder coated
- Also available in S.S
Medicine Trolley
- Wholly made of S.S. material.
- Three shelves with side railing
- Standard dimension: 600mm LX460mm WX810mm H
- Optional dimension available
- 4 inch Quality castors
Dressing Trolley
- Dressing trolley available in S.S. material.
- Two shelves with side railing
- Dressing Trolley with SS bowl and bucket.
- Standard dimension : 760mm LX460mm W X 810mm H
- Optional dimension available.
- Quality Castors.
Moniter Trolley
- Overall approx. size: 800mm Lx 600mm Wx
1408 mm H.
- One drawer & 4 shelves
- Oxygen cylinder cage & I.V. Rod.
- Mounted on 125mm dia castors.
- Switch & socket panel for medical equipment
- Epoxy powder Coated
- Also available in S.S.
Hydraulic OT Table
- Heavy duty mild steel base with nylon wheels for easy mobility or stability
with single action foot actuated loor locking.
- Smooth gear mechanism to avail all operating positions.
- 50, thick electrically sealed mattress.
- Provided with all sporting accessories.
- Provided with all standard accessories.
Electric C Arm Compatible Table
- Four sectional radiolucenttop.
- Eccentircally positioned top for maxium access for movement of C-ARM
image intensiier.
- Base and cover made of heavy & hygienic stainless steel sheet.
- Mobile on smooth running castors and loor locking system for stability
- Leg section and head section are interchangeable
- Most useful for general surgery and certain special surgical procedure.
Telescopic Labour/Gyane/Obst Table
- Three Sectional Stainless Steel Top, Back-rest adjustable by Ratehet.
- Middle Section with "U" cut, leg section can slide under main frame.
- Trendelenberg Position achieved with Pneumatic pump system.
- Provided with head & side safety rails, S.S. Hand Grips.
- Three sectional Mattress, a pair of Lithotomy cruches & one I.V. Rod.
- Sliding S.S. Douche Tray.
- Overall Extendable Size: 187L x 96Wx 80H cm.
LED OT Lights
- Size of Light ield: 12 - 30 cm
- Colour Temperature: 4000-5000 K
- Colour Reduction Index: 93 Ra
- Led life: 50000 Hrs
- Number of LED: 19x4 (Multiple Colour)
- Diameter of Light: 500mm
- Brightness Control : Digital 9 Steps
- Power supply : 220v/50Hz AC
- Focusing: Adjustable
- Optional: Camera & Battery Backup
Mobile Surgical Lights
- Have daylight characters
- Can be adjusted as perthe operation requirements
- Lights arms are made of stainless steel itting
- Range of the color temp 4,200 k +- 300 as natural colortone
- Detachable handle for simplistic sterilization
- Diachronic relectors & color correcting ilters
- Metallic relectors available
Recovery Trolley
- Height adjustable by foot-operated hydraulic pump from 65-95 cm
- Two-section removable X-ray translucent top
- Backrest raised on ratchet
- Trendelenburg/Reverse Trendelenburg positions assisted by gas spring
- Four heavy duty swivel casters of 125 mm dia. two with brakes
- Pre-treated and epoxy powder coated
- Provided with Safety side railings, IV rod, Oxygen cylinder cage and storage
Ventilator
- Noccarc V310+ offers a cost-effective respiratory care
solution with a wide range of ventilation modes and
advanced features. Its turbine-based design enables
independent operation at ICU set-ups without the need of
compressed medical air.
- The intuitive 10-inch touchscreen interface offers extremely
easy controls and enhances healthcare professionals’
patient care experience.
Ultrasound Machine
- Flash forward to enhanced productivity.
- The LOGIQ Forward Series systems improve worklow ease so you can
focus on patients.
- Intuitive design – Reined in more than 4,000 installations worldwide
- 8.4-inch touch-panel – Puts relevant menus at your ingertips to
facilitate uninterrupted scanning.
Anesthesia Work Station
- Durable inish standards, modular design, easy handling, user friendly and
longer service life are some of the salient attributes of our offered range
which make it highly popular among clients spread across the nation.
Additionally, our offered range is available at market leading prices
Cautery
FOGGAR
- Stainless Steel body to ensure portability & resist
chemical attack
- Highest area coverage as compared to any other
conventional fogger in its category
FUMIGATOR
- Made of stainless steel. comes in two options of 1.5 and 5
Ltrs. Tank capacity, mounted on three wheel castors
- Works on 230 V, 50 Hz, Single Phase AC Supply. Electric
Consumption 100 W
- For Optimum result use formalin, 10~12 ml / Ltr
- Net Weight Approx.: 5 to 8 kg based on model
Horizonatl Autoclave
- Our horizontal autoclave units are made of stainless steel to ensure
corrosion resistance surface. Tipple walled construction ensures excellent
level of safety. Boiler is itted separately and connected to the chamber.
Water level indicator is also attached to the boiler. Automatic low water cutoff is optional and itted on demand only.
HI Pressure Autoclave
- Triple walled Vertical High Pressure Autoclaves used for
sterilization under saturated steam pressure at any selected
point between 10-20 PSI (Adjustable)
- These are double chambers with inner chamber (boiler)
made of 18 SWG SS and outer chamber is covered with MS
radial locking system
- Fitted with neoprene rubber gasket, all systems are
hydraulically tested up to 40 PSI as a safety measure